Design, Step II: Pattern Writing, Sizing, and Cast On

I’m excited about your continued interest in this series! It’s fun to be able to share the design process with you.

From last time: I got several questions about why I can’t seam with the tweed. I find that the uneven nature of tweeds, with their bumps and snags and often-fragile construction, results in uneven seams and a lot of broken yarn when trying to sew things together. It always seems to take twice as much irritating effort to get seams that meet my standards–so when I have to seam tweed I always use a similarly-colored strand of smooth yarn for my mattress stitch. Your mileage my vary.

On to the new!

The very next thing I do is write my pattern, in all 10 sizes. I leave very little left undone at this point–by this time I have my pattern-writing routine down pretty well, and I typically only leave things like necklines and sleeve caps as “TBD” before picking up the needles for the first time. (And even those TBDs get ironed out before I actually knit them.) That way, my knitting of the sample serves as a test-knit for the pattern, too. I won’t bore you all with a description of the pattern writing process itself; suffice it to say that it involves spreadsheets and a lot of arithmetic.

What I really want to talk to you about today is how I choose which size to make (and how I’d love to encourage you to choose, too).

To fit you well, sweaters need to fit your shoulders/upper torso well. This is true for men’s suits, and it’s true for our sweaters. This is the single most involved area of a sweater to modify–so much more involved than dealing with the bustline or a pot belly or short arms or a long torso or what have you. If you are a not-particularly-broad-shouldered, B-cup or below woman, you can get away with choosing based on your full bust size just fine. Otherwise…

…otherwise things get a bit trickier. What you really want to do is choose a sweater size based on your upper torso measurement. What’s that, you ask? In short, that’s the way to ensure that your sweaters will fit your shoulders/upper torso. You take it by measuring yourself around your torso, way up in your armpit. This is above the bulk of your bust (and if the girls are especially perky, push ’em down a bit). If you are a large-busted woman, this number is likely much lower than your full bust measurement. If you have broad shoulders and a small chest, this number might well be larger. However it relates to your bust measurement, this is the one you need to go by.

My numbers are as such: Upper torso is 38”, full bust is 40”. I make size 38” sweaters.

Now, I like the look of an especially tailored, fitted sweater. Not everyone does! But whatever style you choose, choose it based on that upper torso measurement.

What do I mean? Well, for a sweater like Ayana, which is meant to be worn with just a smidgen of ease in the bust, I knit the 38” size and give myself a couple of vertical bust darts to ensure the ribbing doesn’t pull overly tight across the fullest part of my bust.

For a much more relaxed cardigan, where the designer has said something like “Intended to be worn with 2-4” of positive ease in the bust.”, I choose a size that gives me 2-4” of positive ease over my torso measurement, or whatever size has a finished bust measurement of between 40 – 42”.

Of course, this will often ensure that you need to make other modifications to the pattern. For women with large busts, this typically means you’ll need some short row shaping or vertical bust darts so that the front of your sweater doesn’t ride up past your bellybutton. (Since I have a booty to match my bust, I typically just have to make my sweaters a little longer overall to accommodate the stretching.) For women with broad shoulders, you might have to start with numbers for a smaller size and increase to the larger size after the waist shaping. But changes like this are infinitely easier to figure out than trying to alter the shoulder region of a sweater.

So there you have it! My cowl pattern is written, I’ve chosen a size (38”), I’ve cast on. Next up: Detours from The Plan.

14 thoughts on “Design, Step II: Pattern Writing, Sizing, and Cast On

  1. This series is really interesting!

    What I want to know today, based on the photo: do you always write patterns in the car?

  2. Ahhh! It makes sense to choose the sweater based on torso vs bust size….makes sense!
    How about a tutorial on using spreadsheets to write patterns/design?…I would pay for that!

  3. Total ” a ha” moment here! Now I get why my sweaters never fit quite right. I usually start to pick a smaller size but then get scared because I know how big my full bust measurement is and knit the bigger size, which never works out right. Thank you Amy! You rock : )

  4. You give such nice advices. Thank you.

  5. Good to know. Back to my measurements to see where I stand. (Might figure out how this measure changes through weight gain/loss as I cycle through the seasons.)

  6. This is an awesome refresher! I’ve finished my Ayana, and as soon as I track down my camera charger I’ll post pictures. It is HANDS DOWN the most comfortable sweater I own. I don’t have to tug down the hem, or roll up the sleeves, or twist the seams around… it really is a joy to wear, thanks to everything I learned in your class.

  7. How about a tutorial on using spreadsheets to write patterns/design and the calculations of course, because that’s the importent item of all. I agree with carolina.
    Because they won’t tell us about it. I no, its the secret of the designer,but without calculations you can’t do much,only the simpel things.

  8. Another interesting post – and instinctively I had always done this in the past when I wanted a more fitted look; but had forgotten this trick over time. Thanks for the reminder.

  9. Thank you for these – I’ve made My First Sweater, and of course since I am not a size 2 Barbie (noting against them, but the odds of a sizing error are … smaller), it was full of fail and I will be frogging it. Too small and even with a mod or two I still don’t like how it looks on me. Totally a wrong style for me. I know that I could go on the heroin diet get down to a size 10 pant and still need a size 14 suit jacket for my shoulders. Having the above info I now feel that my future sizing choices will be much more appropriate.

  10. Thanks for this info 🙂 As a b-cup it’s good to know I can just go straight ahead and choose on bust measurement – I was starting to get a bit confused!

    (Libz on Rav)

  11. This makes so much sense. I knit the Featherweight cardigan last year and it’s too large in the shoulders and just falls off me, looks terrible. I just measured according to your post, and I’m a full 2 inches smaller in the new measurement than the old. I should have gone down a size. Excellent to know for future reference — thank you!

  12. As soon as I am home from work, I am going to have to measure my upper torso. I have a feeling that I am going to learn why I like to knit a size 40-42 inch sweater for a 38 inch bust, even though it is then a little loose in the actual bust.

    If one is particularly long from the top of the shoulder to the top of the bust, are there tricks for making that fit? I usually knit the armsyce a size longer than the body of the sweater, but that means I also have to make the sleeve a size larger, which doesn’t always work. I can do math, I just can’t visualize the math I need to do. I don’t remember that being covered in your fit to flatter series.

  13. I will second the request for a tutorial on sizing and spreadsheets. I have my own makeshift methods for doing this but would love a walk-through from a pro. That’s been my biggest obstacle to officially patterning out designs that I’ve written or adapted — while I can explain what I’ve done in one specific instance, I don’t know how to generalize that to bigger/smaller sizes. Thanks for the great series!

  14. A tutorial on sizing and spreadsheets would be an enormous help to access or buy from the web. I have just discovered your blog and think it is really great.

Leave a Reply

Your email address will not be published. Required fields are marked *

TweetShare